Zum Hauptinhalt springen

B4A.PM.JOBP.COMPLIANCE-CHECK

Graphical Representation​

@B4A.COMPLIANCE-CHECK 2Starts a b4A moduleJOBP B4A.PM.SCRI.COMPLIANCE-CHECK-STATUS 3Determines status of compliance checkSCRI @B4A.SEND-REPORT 4Sends an email using the b4A Module util.Mail using data from an XML variableJOBPSTARTSTARTENDEND

Description​

This service runs the compliance check for a given b4A Package. The compliance tests must be configured in the b4A configuration. Further details can be found in the documentation

Parameter​

&B4AP_PACKAGE_I#
Name of the b4A Package for which the compliance check is started for
&B4AP_MAIL_ADDRESS_I#
An email address which is the recipients of the report if there are any errors
&B4AP_XML_VARIABLE_I#
Object name of the XML variable in which the report will be stored

Output​

&B4AP_COMPLIANCE_CHECK_RESULT_O#
A value of OK defines the success of the compliance check. Otherwise the value is FAILED

Details​

PropertyValue
TypeJOBP
Subtype-
FolderPACKAGES/BEST4AUTOMIC/B4A.PM/SERVICES
Activetrue
TitleCompliance Check
Archive Key 1-
Archive Key 2-
CreatedWRITER/B4A am: 2021-01-12 16:52:35
Last ModifiedTimon Schnakenberg am: 2024-01-08 08:32:40 66 x
Last Used-

Custom Attributes​

NameValue
BBC_SEMANTIC_TYPE#SERVICE

Tasks​

START (1)​

Alias :

Breakpoint
false
Position (x, y)
1, 1

Predecessors :

Successors
B4A.BASE.JOBP@IF.RUN (2, )

B4A.BASE.JOBP@IF.RUN (2)​

Alias
@B4A.COMPLIANCE-CHECK
Breakpoint
false
Position (x, y)
2, 1
Predecessors
START
Successors
B4A.PM.SCRI.COMPLIANCE-CHECK-STATUS (3, )
Pre Conditions​
RUN TASK(  )
Usaged By​
ParentTypePackage
B4A.BASE.JOBP.SMOKE-TESTJOBPB4A.BASE
B4A.BASE.SCRI.DATASTREAMSCRIB4A.BASE
B4A.BASE.SCRI.DATASTREAM#LOGINSCRIB4A.BASE
B4A.DEMO.JOBP.EDIT-BLOCKED-WORKFLOWJOBPB4A.DEMO
B4A.DEMO.JOBP.FAKE-DEVELOPMENTJOBPB4A.DEMO
B4A.DEMO.JOBP.FAKE-DEVELOPMENTJOBPB4A.DEMO
B4A.DEMO.JOBP.FAKE-DEVELOPMENTJOBPB4A.DEMO
B4A.DEMO.JOBP.FAKE-DEVELOPMENTJOBPB4A.DEMO
B4A.DEMO.JOBP.FAKE-DEVELOPMENTJOBPB4A.DEMO
B4A.DEMO.JOBP.FAKE-DEVELOPMENTJOBPB4A.DEMO
B4A.DEMO.JOBP.FAKE-DEVELOPMENTJOBPB4A.DEMO
B4A.DEMO.JOBP.FAKE-DEVELOPMENTJOBPB4A.DEMO
B4A.DEMO.JOBP.FAKE-DEVELOPMENTJOBPB4A.DEMO
B4A.DOC-BUILDER.JOBP.UPLOAD-DOCU-TO-CONFLUENCEJOBP
B4A.PM.JOBP.BUILD-RELEASEJOBPB4A.PM
B4A.PM.JOBP.BUILD-RELEASEJOBPB4A.PM
B4A.PM.JOBP.COMPLIANCE-CHECKJOBPB4A.PM
B4A.PM.JOBP.CREATE-INDEXJOBPB4A.PM
B4A.PM.JOBP.DEPENDENCY-CHECKJOBPB4A.PM
B4A.PM.JOBP.DEPENDENCY-VERIFICATIONJOBPB4A.PM
B4A.PM.JOBP.INIT-PACKAGEJOBPB4A.PM
B4A.PM.JOBP.INIT-PACKAGEJOBPB4A.PM
B4A.PM.JOBP.INSTALL-RELEASEJOBPB4A.PM
B4A.PM.JOBP.INSTALL-RELEASEJOBPB4A.PM
B4A.PM.SCRI.SENDTO#ADD-DOCU-TEMPLATESCRIB4A.PM
B4A.PM.SCRI.SENDTO#GIT-CREATE-BRANCH-BRANCHSCRIB4A.PM
B4A.PM.SCRI.SENDTO#GIT-CREATE-MINOR-MAJOR-BRANCH-BRANCHSCRIB4A.PM
B4A.PM.SCRI.SENDTO#GIT-PULL-BRANCHSCRIB4A.PM
B4A.PM.SCRI.SENDTO#GIT-PUSH-BRANCHSCRIB4A.PM
B4A.TA.JOBP.RUN-TESTSJOBPB4A.TA
B4A.WEB.JOBP.SEND-REMOTE-SERVICE-MESSAGEJOBPB4A.WEB
B4AB.TRANSPORT.JOBP.EXPORT.EXPORT_BY_CONTAINERJOBP
BBU.B4A.AGT.INSTALL.TEST-SERVICES#JPJOBP
DEMO.TEST1.SCRI.ACTIVATE_UC_OBJECTSCRIDEMO.TEST1
DEV.B4A.JOBP.BUILD-PACKAGE-RELEASEJOBPDEV.B4A
DEV.B4A.JOBP.BUILD-PACKAGE-RELEASEJOBPDEV.B4A
DEV.B4A.JOBP.BUILD-PACKAGE-RELEASEJOBPDEV.B4A
DEV.B4A.JOBP.BUILD-PACKAGE-RELEASEJOBPDEV.B4A
DEV.B4A.JOBP.BUILD-PACKAGE-RELEASE-UGLY-AS-HELLJOBPDEV.B4A
DEV.B4A.JOBP.BUILD-PACKAGE-RELEASE-UGLY-AS-HELLJOBPDEV.B4A
DEV.B4A.JOBP.BUILD-PACKAGE-RELEASE-UGLY-AS-HELLJOBPDEV.B4A
DEV.B4A.JOBP.BUILD-PACKAGE-RELEASE-UGLY-AS-HELLJOBPDEV.B4A
DEV.B4A.SCRI.DATASTREAM-BRANCHLISTSCRIDEV.B4A
INT.B4A_DEVELOPMENT.JOBP.BUILD_PACKAGEJOBP
INT.B4A_DEVELOPMENT.JOBP.BUILD_PACKAGEJOBP
INT.B4A_DEVELOPMENT.JOBP.BUILD_PACKAGEJOBP
INT.B4A_DEVELOPMENT.JOBP.BUILD_PACKAGEJOBP
INT.B4A_DEVELOPMENT.JOBP.BUILD_PACKAGEJOBP

B4A.PM.SCRI.COMPLIANCE-CHECK-STATUS (3)​

Alias :

Breakpoint
false
Position (x, y)
3, 1
Predecessors
B4A.BASE.JOBP@IF.RUN (2, )
Successors
B4A.UTIL.JOBP@IF.SEND-MAIL (4, )
Pre Conditions​
RUN TASK(  )
Post Conditions​
  EXECUTE OBJECT( B4A.WEB.JOBP.SEND-SERVICE-MESSAGE, <not set>, do not wait )
[else USER DEFINED]
  EXECUTE OBJECT( B4A.WEB.JOBP.SEND-SERVICE-MESSAGE, <not set>, do not wait )
[end USER DEFINED]
Usaged By​
ParentTypePackage
B4A.PM.JOBP.COMPLIANCE-CHECKJOBPB4A.PM

B4A.UTIL.JOBP@IF.SEND-MAIL (4)​

Alias
@B4A.SEND-REPORT
Breakpoint
false
Position (x, y)
4, 1
Predecessors
B4A.PM.SCRI.COMPLIANCE-CHECK-STATUS (3, )
Successors
END
Pre Conditions​
  SKIP TASK( no errors or warnings in compliance check )
[else USER DEFINED]
  RUN TASK(  )
[end USER DEFINED]
Usaged By​
ParentTypePackage
B4A.PM.JOBP.COMPLIANCE-CHECKJOBPB4A.PM
B4A.PM.JOBP.DEPENDENCY-CHECKJOBPB4A.PM
B4A.PM.JOBP.DEPENDENCY-VERIFICATIONJOBPB4A.PM
B4A.PM.JOBP.GIT-CHANGESJOBPB4A.PM
B4A.TA.JOBP.RUN-TESTSJOBPB4A.TA
DEV.DOCKER.JOBP.TEST-RESULT-MAILJOBPDEV.DOCKER

END (5)​

Alias :

Breakpoint
false
Position (x, y)
5, 1
Predecessors
B4A.UTIL.JOBP@IF.SEND-MAIL (4, )

Successors :

Runtime​

ERT Method
DYNAMIC_AVERAGE
Current ERT
00 : 19 : 19 No. of past runs : 0 +ERT Correction % : 0

Sync​

No sync definitions.

Variables​

No variables defined.

Prompt Sets​

B4A.PM.PRPT.COMPLIANCE-CHECK​

LabelVariableTypeDefault ValueTooltip
B4AP_CONNECTION_I#``
B4AP_PACKAGE_I#``
B4AP_MAIL_ADDRESS_I#{BBC.SHARED.VARA@SEC_SQLI.GET-EMAIL-ADDRESS}
B4AP_XML_VARIABLE_I#B4A.PM.VARA@XML.COMPLIANCE-CHECK#RUNTIME

Automatic Deactivation​

Deactivate on Finish
AFTER_ERROR_FREE_RESTART
Error-free status
-
Deactivate After
0

Runtime Parameters​

AE Priority
0
Timezone
-
Generate at runtime
true
Max. Parallel Tasks
0

Usage​

ParentTypePackageFolder
B4A.PM.JOBP.BUILD-RELEASEJOBPB4A.PMPACKAGES/BEST4AUTOMIC/B4A.PM/SERVICES
DEV.B4A.JOBP.BUILD-PACKAGE-RELEASEJOBPDEV.B4AINTERNAL/DEV.B4A/SERVICES
DEV.B4A.JOBP.BUILD-PACKAGE-RELEASE-UGLY-AS-HELLJOBPDEV.B4AINTERNAL/DEV.B4A/SERVICES
TESU.B4A_PM.JSCH.TESTJSCHTESU.B4A_PMTEST_SUITE/TESU.B4A_PM/CONFIG
TESU.B4A_PM.JSCH.TEST$$$AE21A-0011JSCHTESU.B4A_PMTEST_SUITE/TESU.B4A_PM/CONFIG